transmission side but as Randall pointed out, it's not always necessary if
you have enough clearance to swing by the trans case.....
Chip Krout
Delaware Valley Triumphs, Ltd.
Skippack, PA
1976 TR6 CF57822U
In a message dated 12/19/2009 3:28:47 P.M. Eastern Standard Time,
dmnlaw@peoplepc.com writes:
Can someone tell me if the copper washer for the speedometer angle drive
goes on the transmission side or the speedometer cable side. Thanks,
Doug Nelson
74 TR6
________________________________________
PeoplePC Online
A better way to Internet
http://www.peoplepc.com
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|