In a message dated 12/31/2009 12:56:35 PM Central Standard Time,
pethier@comcast.net writes:
> I'd suggest doing both. Buy a fresh roll of good masking tape. Then
> clamp the dash to a piece of hardwood. Use a sharp drill. You only get one
> chance to do this right, so going over the top on prep may be worth it.
>
Not if you drill a small pilot hole and then flip it over and drill the
proper size from the front.
Dave
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $11.47
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|