triumphs
[Top] [All Lists]

Re: [TR] Stuck Clutch-Preventitive Measure

To: "'ronnie babbitt'" <rbtr3a@cox.net>, "'triumphs2 TRlist '" <triumphs@autox.team.net>
Subject: Re: [TR] Stuck Clutch-Preventitive Measure
From: <wbeech@flash.net>
Date: Mon, 11 Nov 2013 22:57:17 -0600
Delivered-to: mharc@autox.team.net
Delivered-to: triumphs@autox.team.net
References: <000a01cede7a$6a045bd0$3e0d1370$@cox.net>
Thread-index: Ac7eemenqh6NYxezQ3GOf6oZEV19zgA55kzg
Thinking about this thread and remembered that the ever thoughtful Kubota
Tractor people included a small block of wood in my tool kit to block the
clutch in the disengaged position during storage.  So, I thought this might
be a good idea for the TR3B that is chassis-complete and waiting months for
the body work to be ready.  I cut a piece of wood and blocked the clutch
open, maybe a good thing for others who need to store their LBCs for the
winter. 

Just a thought,
Bill

Bill Beecher
'58 TR3A TS/30766L "Tarbaby"
'62 TR3B TCF/2549L " Aunt B" (in rehab)
www.triumphowners.com/1566
'68 Land Rover Series IIa 88" "The Beast"
"Keep Calm and Carry On



-----Original Message-----
From: triumphs-bounces@autox.team.net
[mailto:triumphs-bounces@autox.team.net] On Behalf Of ronnie babbitt
Sent: Sunday, November 10, 2013 7:08 PM
To: triumphs2 TRlist 
Subject: [TR] Stuck Clutch

Several months ago during several weeks if rain and high humidity. I had the
opportunity to drive the 3 to a football game. I came home parked the car.
Later I jumped in the 3 to take a drive and was unable to for the disc was
rusted to the flywheel. Today I thought I would take a look at it. Jacked up
the car. Remover. The inspection plate and discovered I had wasted my time.
I had hoped to free it by sliding a putty knife between the too. Only to
discover there is nothing to see behind the plate. So after reading all the
recent posting. I decided to pull the car using my Yukon. In second gear
with the ignition on it immediately broke loose.  However it was making the
most frighting squeal of which sounded as if it were coming from the Engine
I quickly cut it off. Starting it up again wither clutch depressed it would
go away. My initial thought was I has spun a bearing. Every time the clutch
was depressed the squeal went away. I decided I would drive it around the
block, as I did the sound diminished. All of a sudden it made one last I
pitch squeal with a pop and it went silent. No more squeal. Clutch worked as
designed. All was quiet. Took her to the big hill near my house and up she
pulled just fine. It was very strange how the sound ended. 

Ronnie Babbitt

** triumphs@autox.team.net **

Archive: http://www.team.net/archive
http://autox.team.net/mailman/options/triumphs/wbeech@flash.net

** triumphs@autox.team.net **

Archive: http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>
  • Re: [TR] Stuck Clutch-Preventitive Measure, wbeech <=