6pack
[Top] [All Lists]

Re: Rear Hub End Play and the Factory Service Manual

To: 6pack@autox.team.net
Subject: Re: Rear Hub End Play and the Factory Service Manual
From: Btp44@aol.com
Date: Wed, 28 Feb 2001 01:33:00 EST
Joe-Yes, you can remove excessive end play without disassembling and 
replacing the collapsible spacer. Just make sure that the end play is not 
reduced below the.002"-.004" spec. If this happens, then the spacer will have 
to be replaced, as loosening the adjustment will not restore the end play.  
The end play is not controlled by the nut on the outside of the hub, but by 
the bearing adjustment nut. It is shown on page 213 #21 in TRF's big blue 
catalog. Berry

<Prev in Thread] Current Thread [Next in Thread>