Patrick,
Look over the inlet and outlet check valves and be sure you didn't reverse
them.
Peter
'68 TR250
on 11/9/02 9:19 PM, Patrick Bitton at pbitton@axess.com wrote:
> Hello everyone,
>
> I recently rebuilt my fuel pump and attempted to install it today. Before
> installing it, I check the pump to make sure that it was sucking and
> spitting out air and it did. When I went to install it, fuel managed to go
> into the pump but when I pumped the primer lever, no fuel was coming out on
> the other end. I removed it and disassembled it twice to make sure
> everything was fine and it seemed like it. Does anyone know what the problem
> could be?
>
> Thanks,
>
> Patrick
|