Mike,
I have to believe I'm not receiving all the 6-pack list traffic, so forgive
me if this has already been addressed. I was putting my hardtop in storage to
save that valuable garage space and had access to the hardware.
The original rear bolts are straight (no shoulder) non-stainless (black) 1
1/2 inches in length, 1/4-28 (fine thread). I would avoid anything
casehardened,
as you'd want the bolt to fail in the case of a cross-thread. A stainless
shoulder bolt would work and would be the easiest to find.
Hope that helps.
Steve
CCUO
------- Start of forwarded message -------
From: "Mike Brinker" <74@tr6world.com>
Subject: Hardtop Bolt size
Date: Wed, 6 Aug 2003 22:45:46 -0400
I misplaced the two rear securing bolts that hold the hardtop onto the car.
These are the two bolts that are located beneath the rear window and bolt
through the hardtop and into the deck lid. Can someone help me with a
thread type/size and length of the bolt?
Thanks
Mike
------- End of forwarded message -------
/// 6pack@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|