6pack
[Top] [All Lists]

Herman's tranny and Richard's diff installation successful!

To: 6pack@autox.team.net
Subject: Herman's tranny and Richard's diff installation successful!
From: apackard68@comcast.net
Date: Tue, 27 Apr 2004 19:50:39 +0000
Interested listers:
Last week I completed the installation of a 1982 Toyota celica-supra 5-speed 
transmission and a 93 Infiniti J30 3.92 differential in my green TR250.  Each 
was completed using Heman van den Akker's and Richard Good's conversion kits, 
respectively.  During the car's down time, I also installed new uprated front 
springs from BPNW, a new brake MC from BPNW, poly-u lower inner a-arm bushings, 
and newly turned rotors.  Herman's kit included a hydraulic throw-out bearing 
that eliminates the need for the clutch slave cyliner, fork and fork pins, 
clevis pins, and deciding which hole to use when connecting the slave cylinder 
pushrod.  I was able to take the car on about a three-mile test drive prior to 
taking it from Baltimore to Winston-Salem, NC for the Triumph Club of the 
Carolinas annual show, The Gathering.  
Surprisingly, I made the trip with no incidents and very satisfactory 
performance.  I didn't think I would be able to do all that work on the car and 
get it right the first time.  The rear end gave very smooth and quiet 
performance with zero lash, unlike what I used to see in my previous stock 
diff.  I didn't drive it hard enough to test the limited slip.  The tranny had 
a much shorter throw than I had anticipated.  It seemed even shorter than the 
stock 4-speed that I replaced.  Having 5th gear was a welcome luxury, too.  I 
was traveling about 70 mph at 3000 rpms and ended up with 20% better gas 
mileage as a results (24 vs 20 mpg).  BTW, I did not stay at or below 70 very 
often, generally cruising along closer to 80 most of the way home on I-81.  
Between the travel to NC and back, the Saturday rally and general around-town 
driving, I spent 960 miles in my LBC this weekend.  Apparantly, that was far 
enough to earn the "Farthest distance traveled in a British Car" award at the 
show.  At home I drive this 250 about 50% of the time, so a mileage award is 
the most appropriate for that car.  Thanks to the TCOC for putting on a 
well-run and well-attended show - about 130 cars was the last count I heard, 
which included six TR250s!

Please feel free to ask any specifics about the conversions.  I'll be glad to 
share the details of the installations.
Andy
CD6521L - converted car
CD6746L - still original





<Prev in Thread] Current Thread [Next in Thread>