Sounds like something got fried...
I'd check the fuses and make sure you replace them all with fresh ones...
joe
-----Original Message-----
From: owner-6pack@autox.team.net [mailto:owner-6pack@autox.team.net] On
Behalf Of Charles A Cheshire
Sent: Monday, December 05, 2005 19:17 PM
To: 6pack@autox.team.net
Subject: Elec Problem
Installed high torq starter, made elec connections noticed WR Ign wire
insulation was a bit bare. I turn key on and heard heard a pop noise,
turned key off disconnected battery. Checked to see if any problems were
visible, replaced WR (white & red wire)
connected battery. I have no power now helpful info requested.
Chuck
71 TR6
|