John:
You will need to install a lockout switch on the top cover from
your 4-speed. You cannot install an overdrive without the third switch
on the top cover. If the OD is left engaged in reverse, you will break
the overdrive, hence the need for the extra switch to prevent this.
There are some instructions on my web page should you have any
questions.
Vance
------------------------------
Cogito Ergo Zoom
(I think, therefore I go fast)
TR6 Web page: http://home.comcast.net/~v.navarrette/
-----Original Message-----
From: owner-6pack@autox.team.net [mailto:owner-6pack@autox.team.net] On
Behalf Of JOHN JOHNSON
Sent: January 12, 2006 2:08 PM
To: 6pack@autox.team.net
Subject: TR6 Transmission Question
Hi Guys, I am replacing the 4 speed in my 1974 TR6 with a Volvo
overdrive
converted transmission. The top cover and rods inside do not move freely
on
the overdrive but the rest looks fine. I want to use the top off my four
speed on it. Has anyone swapped a non-overdrive top to an overdrive
transmission? The one switch is on top of the overdrive cover and my
four
speed ahs one on each side but I hope you can just move the wires. Any
help
would be nice Thanks, John
|