I put new alloy drums on last summer. I just had to back the adjuster off,
and they went on; It was a tight fit, but no problems.
Al
----- Original Message -----
From: "James Henningsen" <trguy@cfl.rr.com>
To: <6pack@autox.team.net>
Sent: Saturday, June 03, 2006 10:09 AM
Subject: Aluminum Brake Drum Install Update
> Ok - after additional checking my set of aluminum finned rear drums from
> TRF
> will need to have the four stud and center hole widened in order to fit
> correctly. It was my understanding that these were manufactured to
> install
> as is on the stock rear axle. This is probably the reason for the rubbing
> I
> am experiencing on the shoes. They almost fit and don't need much in terms
> of altering. My set was new on the box (Made in Italy) but 10 years on
> the
> shelf. A friend of mine has the identical set new from TRF this year and
> has
> the same problem. Anyone else experience this with the new TRF drums?
> Also, looking for a set of stock kidney panel speakers. Please email off
> list if you have some available.
>
> Thanks in advance,
>
> Jim Henningsen
>
> Maitland, FL
>
> 75 TR6
>
> 63 TR4
|