Ken, the bleed valve is the bleed nipple. Just back it off a quarter of a turn
until you can get fluid out of it and tighten when bled. The nipple should be
on the top of the rear of the slave cylinder for easier bleeding.
Stan
-----Original Message-----
From: owner-6pack@Autox.Team.Net [mailto:owner-6pack@Autox.Team.Net] On Behalf
Of Jsut4fun@aol.com
Sent: Wednesday, July 04, 2007 5:20 PM
To: 6pack@autox.team.net
Subject: [6pack] Bleed Valve
I just replaced my clutch master clutch cylinder and now need to bleed the
system. Is the bleed valve on the slave cylinder a separate item or is it
simply part of the bleed nipple?
Thanks,
Ken
CF55382
|