EGR hole is 3/4 fine thread, you also need the latter intake manifold.
Al
www.triumphowners.com/624
----- Original Message -----
From: <acs25m@swbell.net>
To: <6pack@autox.team.net>
Cc: <triumphs@autox.team.net>
Sent: Saturday, February 09, 2008 11:39 PM
Subject: [TR] egr port
> Hi all,
> I have a question that I hope someone can give me an answer to. I
> had to replace the head on my TR250 with a later model head. It has an
> egr port in it that I need to plug. Does any one out there know what size
> plug will fit. It looks to be a fine thread. Somewhere between 1/2" and
> 3/4" or possibly a metric? Any idea where I can find one?
> Thanks in advance,
> John Maneke
> 68TR250
> cd3416
> _______________________________________________
_______________________________________________
Support Team.Net http://www.team.net/donate.html
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
http://www.team.net/archive
|