When I replaced my transmission cover on my '72 with factory A-type OD I
transferred the existing covers to the new one by cutting out the two
sections , one on the left side for the solenoid and right hand for the
speedo.
ISTR that the ABS covers have the "bump outs" where the covers go. I sealed
them with "bun bum and they seem to work fine. I also seem to recall that
TRF has them listed in their TR6 catalogue. If they are not available you
might want to contact Scott Harper at Team Triumph to see if you can
obtain them.
Sam Clark
Green Country Triumphs
In a message dated 7/6/2011 1:31:19 P.M. Central Daylight Time,
6pack-request@autox.team.net writes:
The shop manual section for this job says to
remove right side tunnel carpet and
take off access cover, great except that
my 73 is an A type OD conversion, so no
got one.
The plastc tunnel cover from
the RF didn't have that option when I bought it.
________________________________________
6pack@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|