6pack
[Top] [All Lists]

[6pack] Fwd: Re:JC Whitney Center Console

To: 6pack@autox.team.net
Subject: [6pack] Fwd: Re:JC Whitney Center Console
From: kirsis stephen <sakirsis@consolidated.net>
Date: Thu, 8 Nov 2012 11:04:56 -0500 (EST) actions=TAG refid=str=0001.0A02020A.509BD829.0080,ss=1,re=0.000,fgs=0, ip=24.128.14.62, so=2011-07-25 19:15:43, dmn=2011-05-27 18:58:46, mode=single engine refid=str=0001.0A02020A.509BD829.0080,ss=1,re=0.000,fgs=0, ip=24.128.14.62, so=2011-07-25 19:15:43, dmn=2011-05-27 18:58:46
Delivered-to: mharc@autox.team.net
Delivered-to: 6pack@autox.team.net
---- Original message ----
>Date: Thu,  8 Nov 2012 11:01:31 -0500 (EST)
>From: kirsis stephen <sakirsis@consolidated.net>  
>Subject: Fwd: Re:JC Whitney Center Console  
>To: 6pack@autox.com
>
>
>
>---- Original message ----
>>Date: Thu,  8 Nov 2012 10:56:47 -0500 (EST)
>>From: kirsis stephen <sakirsis@consolidated.net>  
>>Subject: Re:JC Whitney Center Console  
>>To: "Bruce Simms" <brucesimns2003@yahoo.ca>
>>
>>Have they up-graded the hinges on the JC Whitney console? I bought one a 
few 
>>years back and it was broken at the plastic hinges in a matter of days. Tried 
to 
>put 
>>a snap on the front so it could not slide side ways when any side pressure 
was 
>>applied i.e when either passenger or driver entered the car. Did not work. 
>Stronger 
>>hinges were definitely needed. I ended up tossing it. If it was seated in the 
>storage 
>>bin would be even nice but it just laid on top and very subject to side 
pressure. 
>>Combine that with 1/4" plastic hinges and you end up with a piece of junk.

________________________________________

6pack@autox.team.net

Archive: http://www.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/6pack/mharc@autox.team.net


<Prev in Thread] Current Thread [Next in Thread>