alpines
[Top] [All Lists]

Re: Powder Coating

To: Bill Gullatt <bgullatt@mesahq.com>,
Subject: Re: Powder Coating
From: Bob Palmer <rpalmer@ames.ucsd.edu>
Date: Thu, 08 Jun 2000 07:25:03 -0700
Bill,

The insulating effect of the paint is totally negligible. They paint 
radiators black too, BTW. If, however, bead blasting is done prior to 
coating, then you will need to be very, very thorough in cleaning all the 
media out of the block. Mask off any internal surfaces before bead blasting 
to keep the media from imbedding itself in the surfaces.

Good luck,

Bob

At 08:21 AM 6/8/00 -0500, Bill Gullatt wrote:
>There is a fairly new powder coater here in Huntsville that seems to be very
>reasonable. I was considering having the Alpine block and suspension pieces
>coated black. He quoted me $50 for the block. Will the powder coat cause any
>excessive heat problems?
>
>Bill Gullatt
>Associate Systems Engineer
>MESA Solutions, Inc.
>(256) 864-0400 x 2302


<Prev in Thread] Current Thread [Next in Thread>