I would get some teflon shrink tubing of the correct color (or incorrect
color, it is, after all, a British car!), and shrink it down with a
hairdryer over the area that is melted. Any electronics store will have
it, and it is safe. Bill
Chris Mottram wrote:
> I was looking over my wiring harness before I attempt
> to reinstall it into my car. I notied that the white
> tach wire that runs from the ignition switch to the
> tach is semi-melted (somebody must have let some, but
> not all of the smoke out). No visible burnt marks but
> the plastic was melted lightly to the next wire. I am
> an idiot to replace just the one wire rather than
> replace the who harness ($260 bucks). Would I be
> likely to set my car ablaze? This car is starting to
> go through my money faster than the NASDAQ.
>
> Thanks in advance for your help.
> Chris
> Get email at your own domain with Yahoo! Mail.
> http://personal.mail.yahoo.com/
|