Tech Tip

["Thomas Wiencek" <wiencek@anl.gov>]

Tech Tip!

 

Our Tech Tip this week is from Ray Campbell - Thanks  

When reconditioning your top bows (for a new convertible top) replace
the worn out or completely missing felt strip padding that goes on the
top of the bows; go to the hardware store and buy a Velcro "peel and
stick" kit.  Use the 'matted strip (not the 'hooked strip'.  You may
have to cut it down to 1/4"  wide, but is so easy to install and adds
that little cushion between the bows and the underside of the top.