On 1191 the jack instructions and the tire pressure sticker are both on the
under side of the hydraulic / air brains brains compartment. The jack instr.
are at the bottom hinge area inside the X at 6 o'clock. The tire instr. is at
the 9 o'clock position inside the X. My tire inflation sticker is on an angle.
Both are read from looking from the front of the car, looking back from the
driver seat. I also have the common assembly DOP sticker inside the X at 3
o'clock also on an angle @ 30 degrees.
1191 did not come delivered new with the fix o flat can nor a jack.
I hope that helps., email me if you need more info.
Jim
Fedeli, Joe wrote:
> Reposting of an earlier question. I only received one reply, does no one
> else have the decals?
>
> >>
> >> Bricklin people...I need your expertise!
> >>
> >> 1). Does anyone know the correct 'EXACT' location for the tire
> >> pressure and jacking instructions label location within the car? I
> >> thought it is on top of the driver's seat hydraulic door area (while
> >> closed/not open facing the rear). Which one goes left/right/up/down etc.
> >> Also, is this the correct location for the jack to be installed on top of
> >> the pump and lines?
> >> 2). Where the 'fix-a-flat' Bricklin tire cans an option or standard
> >> equipment along with the 'Bricklin' interior door handle covers or a
> >> dealer item? Any info on this trivia?
> >> The documents I have along with the concurs rules does not identify
> >> this minutia. Thanks for the brain exercise on this one gang!
> >
> >
|