Fuel Filterl

[grants@unb.ca]

Thanks to John's advice, VIN 1628 has made a full recovery.  I 
managed to extract the broken treads of the fuel filter from the carb 
with a #3 (5/16-7/16) Screw Extractor that I carefully turned by 
hand with a wrench. First attempted removal with a Craftsman 
Screw-Out but it wouldn't grip the metal.  Prior to removal a heavy 
spray of WD 40 was applied.  The project was completed with a  
vacuming of the site to remove medal bits. 

Steve Grant