At 02:07 PM 4/4/2005 -0500, Greg Schroeder wrote:
>What is the best method for the pop rivet removal on the black ground affect
>panels? I want to remove these to do some rust proofing and check the brake
>lines, but I do not want to cause any damage to the panel. There are
already a
>couple of cracks around some of the rivets....
The rivits are 3/16" dia. So I used a 3/16" drill. Takes the heads off
nicely.
John
John T. Blair WA4OHZ email: jblair1948@cox.net
Va. Beach, Va (eBay id: zebra48-1)
Phone: (757) 495-8229
48 TR1800 48 #4 Midget 65 Morgan 4/4 Series V (B1109)
75 Bricklin SV1 (#0887) 77 Spitfire 71 Saab Sonett III
65 Rambler Classic
Morgan: www.team.net/www/morgan
Bricklin: www.bricklin.org
If you can read this - Thank a teacher!
If you are reading it in English - Thank a soldier!!
|