Do you mean the flat gasket, or the 3-dimensional, metal flange, spacer-type
thingy? When I needed those a couple years ago I took the old one to an
Advance Auto with an old guy who was willing to let me look through the stock.
Unfortunately my gasket box also contains RX-7 gaskets and I sometimes can't
be sure which is which, unless the exhaust is staring me in the face as would
normally be the case.
I think the flange is either Advance Auto "Engine Seal" brand part #85076 or
85015. They were close, but I think I used 85015 (since 85076
is still in the bag, athough I have another larger one loose, with no bag or
part number...hmm?)
Printed on the bags:
85076 Exhaust Flange, Chry Prod, Dodge TK 6, V8 '58-87
sku 9547, future no. 12-2513
interchanges to:
Detroit 13032, 130321
McCord 82 0042
Victor F 5495C
85015 Exhaust Flange, AMC Jeep/Eagle V8 1971-91
sku no. 60103-1, future no. 12-1068
interchanges to:
Detroit 130031
McCord 82 0060, 82 0063
Victor F 7201, F7204
Again, I think I used 85015. Hope this helps.
George # 670, 220
In a message dated 1/10/2006 8:48:46 P.M. Eastern Standard Time,
colemaal@hotmail.com writes:
Sitill trying to find a part # for the doughnut gasket for the exhaust
manifold for a 74. I have tried a few different ones listed for the 360
with no luck.
Any help would be greatly appreciated.
Alan Coleman
#246
|