Re: [Bricklin] AMC Rod Bearings

["Greg Schroeder" <gschroeder@comcast.net>]

I have looked at the old bearings and they indicate AT-20.  There is also a
part number 3219860.  I will see if I can find a reference to these, but I
would believe these bearings to be thinner that the standard ones that I had
purchased.  I need to get a caliper on them to measure.

Greg 0036
_______________________________________________
Support Team.Net  http://www.team.net/donate.html

Bricklin@autox.team.net
http://autox.team.net/mailman/listinfo/bricklin


http://www.team.net/archive