I also use the Edelbrock 1406 carb. I use the edlebrock performer intake
also.. The original intake on the 360 is a spreadbore style. The rear
holes are larger than the front. The 1406 carb is a square bore. The holes are
the same size.. You need an adapter plate to mix them.Also need the
Chrysler kick down adapter to use on an automatic.
-----Original Message-----
From: serge.ber@sympatico.ca
To: bricklin@autox.team.net
Sent: 9/27/2009 9:01:05 A.M. Eastern Daylight Time
Subj: [Bricklin] 360 carb
who replaced there carb on 360 what did you used ..what brand did you used
and
part number if you can please ...was it perfect fit ...tks for info serge
Bricklin@autox.team.net
http://autox.team.net/mailman/listinfo/bricklin
You are subscribed as bricklin0095@aol.com
http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Bricklin@autox.team.net
http://autox.team.net/mailman/listinfo/bricklin
http://www.team.net/archive
|