Re: [Bricklin] Air Pump wire recommendataions

["Kevin Rodgers" <krodgers@nautel.com>]

Where are you running the wire from?  Assuming you are running the wire from 
the starter relay and using a relay for the Viair a 12 gage wire should be fine 
but you could use a 10 gage to reduce and loss.  Before you change the wire you 
should measure the current draw of the pump. I would expect it to draw 15 to 20 
amps.
What size fuse is blowing now?

Regards

Kevin

Vin 2824 and 2455
_______________________________________________
Support Team.Net  http://www.team.net/donate.html

Bricklin@autox.team.net
http://autox.team.net/mailman/listinfo/bricklin


http://www.team.net/archive