James A. TenCate scribed:
Subject: removing paint from alloy wheels
> I need to remove the paint from the alloy wheels on my TR-8. Any
> recommended chemicals that would be "safe" (or should I just find
> a place to shell or bead blast them clean)?
I've bead-blasted. It works, but it's slow. You might get some
spray-and-strip (Hemmings, et. al). It works pretty good.
> Second question: Once the wheels are clean, will any old primer work?
Better to use an Aluminium rated primer, or better yet, 2 part epoxy.
BTW, colour paints for basecoat/clear coat is formulated different than
regular ole' colour paints. (Enamals) I imagine you can do with a
*compatible* clear overcoat, but it probably won't be as tough.
(Don't spray laquer over enamel, especially fresh!)
You might visit your local paint store, and tell them what your needs are.
________
/___ _ \ Roger Garnett (Roger_Garnett@cornell.edu)
/| || \ \ Agricultural Economics | "The South Lansing Centre
| |___|| _ | 3 Warren Hall | For Wayward Sports Cars"
| | \ | | | Cornell University | (Lansing, NY)
\| \ |__/ / Ithaca, N.Y. 14853-7801 | (607) 533-7735
\________/ (607) 255-2522 | Safety Fast!
|