british-cars
[Top] [All Lists]

RE: Bondo application

To: british-cars@autox.team.net, gibbons@northpole.med.uvm.edu
Subject: RE: Bondo application
From: "GERONIMO, SC9-32, 765-4903, PAGE 231-6612" <GENDIMEN@T12SYS.intel.com>
Date: Thu, 28 Oct 93 11:47:05 PDT
Great writeup!!!!

>jobs, I think 3/4 of the stuff I apply ends up on the floor.  For the last
>coat or two, one may go to the really fine finishing stuff to fill
>pinholes and minor imperfections.  Wear a good dust mask or respirator for

>6) Paint.  I try to finish the work on a section, then apply a coat of
>primer before I quit for the day to seal the surface and prevent moisture
>penetration.  DP 40 is good if the section is finished completely. 

Some type of body putty (like Nitrostan(sp?)) is a good idea at this point to
fill the imperfections in the bondo that the primer can't fill. I think this
can be wet sanded also to get a really smooth finish before final primer.

Mike




<Prev in Thread] Current Thread [Next in Thread>