And a different tranny mount!
----- Original Message -----
From: Eric Armstrong <firstname.lastname@example.org>
To: R Haug <email@example.com>
Cc: Michael Tarelka <firstname.lastname@example.org>; <email@example.com>
Sent: Thursday, July 13, 2000 2:34 AM
Subject: Re: 1600 and 2000 Differences
> 5 speed requires a different driveshaft than a 4 speed also.
> On Wed, 12 Jul 2000, R Haug wrote:
> > Michael Tarelka wrote:
> > > Dear Knowledgeable Group:
> > >
> > > Are the only differences between a 1600 and 2000, the size of engine
> > > transmission?
> > Michael,
> > If you are talking about the different car models, you will find that
> > rear end ratio is different. 3.7 - 2000, 3.89 - 1600, Grille and
> > are different. The wiring harmess numbers are different, speedometer
> > tach are different, the console shift plate and radiator and the hoses.
> > Could be a few other things too.
> > Bob
> Eric Armstrong
> e-mail: firstname.lastname@example.org