Check again, John has a early (Solex) 2000,
most likely he is talking about a pipe that
connects to the water passages! <grin>.
Heck if I know what to call it, other than "that pipe for
the water coolant that bolts to the intake manifold".
> I believe it's called a balance tube. At least some 240 books I have call it
> that. Sounds logical as it balances the carbs out and reduces the impulses
> and helps the other cylinders fill using the vacuum created by the other
> ----- Original Message -----
> From: "John Hogan" <email@example.com>
> To: <firstname.lastname@example.org>
> Sent: Sunday, January 20, 2002 2:52 PM
> Subject: website update
>>Ok, I don't plan to spam this list everytime I change my website, but this
>>is the first time I actually have a site up. If you are inclined, please
>>hop over to www.madgrizzle.com and check it out and comment on it. It's
>>one of those pre-fab'ed Frontpage websites and won't win any awards, but I
>>was able to put it together in less than 2 hours. The main area of
>>interest is the Photo page. It is going to chronicle my every step in the
>>restoration of the car.. ad nauseam
>>I named the car Rhoda.. not sure if that's an original name, but I'm gonna
>>use it nonetheless.
>>Question: What is the proper name for the piece that supports the
>>accelerator cable linkage? It mounts to the manifold and apparently is
>>hollow, as if it also equalizes the two sides of the manifold.
>>1967.5 Datsun 2000 SRL311-00141 "Solex"
>>/// email@example.com mailing list
>>/// Send admin requests to firstname.lastname@example.org or go to
>>/// Send list postings to email@example.com
> /// firstname.lastname@example.org mailing list
> /// Send admin requests to email@example.com or go to
> /// http://www.team.net/cgi-bin/majorcool
> /// Send list postings to firstname.lastname@example.org
/// email@example.com mailing list