datsun-roadsters
[Top] [All Lists]

Re: [Roadsters] Front Calipers

To: datsun-roadsters@autox.team.net, matthews517@earthlink.net
Subject: Re: [Roadsters] Front Calipers
From: Mike Harris <harris_seq@yahoo.com>
Date: Thu, 7 Jan 2010 05:39:57 -0800 (PST)
I just pulled the lines from my calipers and they are different inside and
out, inside has deep holes for the line and bleed screw, outside has deep hole
facing up and shallow hole pointing down, sorry if I gave misinformation
earlier I was going from memory (and it sure ain't what it used to be)
--- On Wed, 1/6/10, matthews517 <matthews517@earthlink.net> wrote:

> From: matthews517 <matthews517@earthlink.net>
> Subject: RE: [Roadsters] Front Calipers
> To: "'Mike Harris'" <harris_seq@yahoo.com>, datsun-roadsters@autox.team.net
> Date: Wednesday, January 6, 2010, 8:16 PM
> Hi all,
> If I read this correctly, the outer and inner are actually
> different. Not
> just upside-down of the opposite. I'm about to buy some
> cylinders and need
> to make sure. Would rather buy 4 x $75 ones than 2@$75 and
> 2@$95.
> Thanks! Matt
>
>
> -----Original Message-----
> From: datsun-roadsters-bounces@autox.team.net
> [mailto:datsun-roadsters-bounces@autox.team.net]
> On Behalf Of Mike Harris
> Sent: Tuesday, December 22, 2009 12:05 PM
> To: datsun-roadsters@autox.team.net
> Subject: [Roadsters] Front Calipers
>
> Re: Caliper location, the calipers piston housing has
> different size (in
> depth) threaded areas for the brake lines. The inside
> piston will have the
> bleed screw up (or a deep threaded hole for the bleed screw
> and ball) the
> outside piston deep hole will face down. Your lines will
> tell you the
> correct location if you get lost, (deep holes for bubble
> flare or bleeder
> screw other holes take inverted flare)  it doesn't
> matter the piston
> location as long as you have them turned right to accept
> the lines.
> Also I think the needle is is to keep the piston from
> returning all the way
> as the brake pads wear, someone else may know this for
> sure.
> Hope this helps
> ________________________________________
> Support Team.Net  http://www.team.net/donate.html
>
> You are subscribed as whamba@earthlink.net
>
> Datsun-roadsters mailing list
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/datsun-roadsters
________________________________________
Support Team.Net  http://www.team.net/donate.html


Datsun-roadsters mailing list

http://www.team.net/archive

http://autox.team.net/mailman/listinfo/datsun-roadsters

<Prev in Thread] Current Thread [Next in Thread>
  • Re: [Roadsters] Front Calipers, Mike Harris <=