UPDATE
A drop of crazy glue on the mounting point, light clamp, reassemble,
voila!
No leaks, Solex performance! (Until the crazy glue fix fails.)
Anyone have a float assembly and a starter return spring standoff
(mounts to top of cover) for a Type Q?
- Bob
RWM wrote:
> Well, it seems that one of the floats has fallen off the fork, thus
> reducing the flotation to work the valve by 50%.
> Valve itself seems fine. No crud in the banjo filters or bowl.
> Completely clean, in fact.
>
> The working end of the small mounting tang inserted in the float body
> seems to have corroded/dissolved just below the surface of the float.
>
> Anyone seen this before? Ethanol in the "new fuel", perhaps?
>
>
>
>
> RWM wrote:
>> On closer examination, the post-shutdown fuel overflow is from both
>> throats, so this seems more likely to be a float/valve issue.
>>
>> Now, to get the covers off for inspection without damaging the
>> gaskets....
>>
>> - Bob Mann, '68 2000 Solex
> ________________________________________
> Datsun-roadsters@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $16.00
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/datsun-roadsters/rwm@rwmann.com
--
R.W. Mann & Company, Inc. >> Airline Industry Analysis
Port Washington, NY 11050 >> tel 516-944-0900, fax -7280
mailto:info@RWMann.com >> URL http://www.RWMann.com/
This e-mail is for the designated recipient only and may contain
privileged or confidential information. If you have received it
in error, please notify the above sender immediately then delete
the original e-mail. Any other use of this e-mail is prohibited.
________________________________________
Datsun-roadsters@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $16.00
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|