Fuel Pressure Regulators

[Joe Curry <spitlist@gte.net>]

I want to thank the following people who replied to my question about 
regulators:
John Lye
John Frymark
Jack Drews
Baxter Culver
Jim Hill

The consensus of opinion is that the lower pressure (1-4 psi) regulator is the 
one to have for Webers.  Plus apparently one needs a
much greater supply pressure for the regulator to work properly.

All those who responded indicate that theirs are running at 3 to 3.5 psi and 
operate well in that range.

Thanks again to all who responded!
Regards,
Joe