fot
[Top] [All Lists]

Re: TR6 roll bar

To: walt@hot-tr6.com
Subject: Re: TR6 roll bar
From: BillDentin@aol.com
Date: Sat, 31 Jan 2004 15:47:41 EST
In a message dated 01/31/2004 9:44:11 AM Central Standard Time, 
walt@hot-tr6.com writes:


> a properly engineered and fabricated roll bar will in fact fit into a TR6, 
> meet SCCA Solo II specs and road racing specs and still be able to use your 
> factory stock rag and hard tops. I am attaching some pictures of mine. 
> It is welded to the frame in four places. I have a pair of 5 point safety 
> harnesses. During the summer I have my rag tom and during the winter I 
>install 
> my factory steel hard top.
> 

Walt:

I understand, and agree.  

In the late 1970s and very early 1980s Ole Blue still had it's windscreen and 
rag top in place from when it was converted from a race car to a streetable 
car for a short period of time.  At that time, the roll bar allowed for the top 
to be put up.  In the 1970s vintage sanctioning groups like the VSCDA only 
encouraged roll bars, they didn't insist.  As you can imagine, many of the 
pre-WWII group fought this issue, tooth and nail.  They were major players in 
vintag
e then.  When the vintage sanctioning groups started insisting on a roll bar 
two inches above the driver's helmet, we converted Ole Blue back to strict 
racing trim, and added a loop to the roll bar to get it above my helmet.

I could be wrong, but my comment suggested some vintage sanctioning groups 
either waive or look the other way for that 2" rule for closed cars.

Bill

<Prev in Thread] Current Thread [Next in Thread>
  • Re: TR6 roll bar, BillDentin <=