I got a kit from a fellow a year ago and it works well. You aren't
specifying if this is a TR6 or TR4 you want it for.
Here's the link: http://topshamautoparts.com/tr6/eliminator.htm
he also has fuel injection retro for Stromberg carbs.
Charly
----- Original Message -----
From: "rob" <19to1tr6@comcast.net>
To: "Richard Taylor" <tarch@bellsouth.net>; <fot@autox.team.net>
Sent: Thursday, March 17, 2005 12:25 PM
Subject: Re: Harmonic balancer
> Rich there is a kit that allows you to remove the fan and hub and secure
> the balancer . The kit has a pinned washer and shorter blot. T he supplier
> was posted buy a list member about a year ago It may have come from
> Cambridgesport Its quit a wheight reduction >>> In my case I just had
the
> hub that holds the fan turned down to just the size of the shaft and used
> the stock bolt.There was some wght reduction but not as much as the kit
> offered. It worked out well because on the end closest to the balancer I
had
> turned and made flat to make a base for a trigger wheel for the crank ing
.
> Anyway perhaps some will again gives us the supplier of the fan
elimination
> kit. rob
> ----- Original Message -----
> From: "Richard Taylor" <tarch@bellsouth.net>
> To: <fot@autox.team.net>
> Sent: Thursday, March 17, 2005 1:23 PM
> Subject: Harmonic balancer
>
>
> > Fot,
> >
> > I do not use the mechanical fan so I want to cut off the snout of the
> > rotating fan hub extension. What should I anticipate if I just cut it
off?
> >
> > Do I need some other weighty thingy there? Who figures out vibration or
> > harmonic balancing acts? Is this another one of those black arts things?
> >
> > Richard Taylor
> >
> > Atlanta
|