fot
[Top] [All Lists]

RE: [FOT] TR6 alternative pistons

To: "'Randall'" <ryoung@navcomtech.com>, <fot@autox.team.net>
Subject: RE: [FOT] TR6 alternative pistons
From: "Terry and Cindy" <Roadandtrack2@hypermax.net.au>
Date: Thu, 16 Mar 2006 09:12:44 +1000
Gees, I've opened up a long thread here.

Buttons are not hard to make, mush as Kas suggests. I run a machine shop
and do them , but they are time consuming and that has to be added to a
customers job. In bulk, on an NC machine, they should cost pennies. At
A$70/hr for labour, they cost heaps when done by hand. I've made them a
"loose press" fit in the gudgeon pin. 

Terry



<Prev in Thread] Current Thread [Next in Thread>