fot
[Top] [All Lists]

RE: [FOT] Heavy duty manifold gaskets

To: "'Henry Frye'" <henry@henryfrye.com>, <chasgee@aol.com>,
Subject: RE: [FOT] Heavy duty manifold gaskets
From: "Mike Munson" <fasttrs@mindspring.com>
Date: Thu, 18 May 2006 06:25:45 -0400
I wondered what his speed secret was. It took me quite a while to figure out
where I could pass him... and the rest of the race to worry about him
passing me back when my tires went away.

Mike

-----Original Message-----
From: owner-fot@autox.team.net [mailto:owner-fot@autox.team.net] On Behalf
Of Henry Frye
Sent: Tuesday, May 16, 2006 7:44 PM
To: chasgee@aol.com; RKramer@rdoequipment.com; Gt6steve@aol.com;
fot@autox.team.net
Subject: RE: [FOT] Heavy duty manifold gaskets

Hmmmmm...

As we saw at Hallett, Chuck has an insanely fast Spitfire. He uses super
slippery stuff on his manifold gaskeys, which must then get sucked into his
head and header.

Can this super slippery coating be one of his deamon tweeks???

Henry Frye
Sent from my Treo PDA

-----Original Message-----
From: "chasgee@aol.com" <chasgee@aol.com>
To: "RKramer@rdoequipment.com" <RKramer@rdoequipment.com>;
"Gt6steve@aol.com" <Gt6steve@aol.com>; "fot@autox.team.net"
<fot@autox.team.net>
Sent: 5/16/06 3:00 PM
Subject: Re: [FOT] Heavy duty manifold gaskets

Kind of a heavy slither or a light slather, depending on your perspective.
Use rubber gloves to apply, keeps the "migration" down.
 
Chuck 
 
-----Original Message-----
From: Kramer, Robert <RKramer@rdoequipment.com>
To: chasgee@aol.com; Gt6steve@aol.com; fot@autox.team.net
Sent: Mon, 15 May 2006 14:10:33 -0500
Subject: RE: [FOT] Heavy duty manifold gaskets


I've never tried that but wondered if it would work. Do you use a thin
or thick coating? (Slather or slither)

Bob Kramer
Sales Manager
16415 North IH35
RDO Equipment Co.
Pflugerville, TX  78660
800-775-3838


-----Original Message-----
From: owner-fot@autox.team.net [mailto:owner-fot@autox.team.net] On
Behalf Of chasgee@aol.com
Sent: Monday, May 15, 2006 1:55 PM
To: Gt6steve@aol.com; fot@autox.team.net
Subject: Re: [FOT] Heavy duty manifold gaskets

Use the aluminum paste anti-sieze.  Works really well for this sort of
thing.
 
Chuck 
 
-----Original Message-----
From: Gt6steve@aol.com
To: fot@autox.team.net
Sent: Mon, 15 May 2006 12:05:20 EDT
Subject: [FOT] Heavy duty manifold gaskets


Good Mornin' Amici,

Maybe a little brainstorming on a Monday morning?

I found the heavy duty six cylinder manifold gaskets I wanted at APT.  
Apparently they're thre ones Moss was selling but discontinued.  They go
on 
great, 
seal well but don't come off for reuse.  The white cardboard burns,
get's 
crispy and sticks to the surfaces.  I was thinking of covering both
gasket faces 

with a layer of heavy duty aluminum foil from the kitchen to resolve
that issue. 

 Later I wondered if Cop-a Slip antisieze in the spray can was an
option.  Or 
silver paint.

Anybody have any opinions to share.

Steve






________________________________________________________________________
Check out AOL.com today. Breaking news, video search, pictures, email and
IM. All on demand. Always Free.







<Prev in Thread] Current Thread [Next in Thread>