On the SU's, orientation of the float bowl tops (at least on the SU's
with the floats attached to the lid) is important. You want the
pivot at the front or back, not the sides.
- Tony
At 07:48 AM 8/25/2006, Coffey, Jack wrote:
>My street TR-250 has developed an intermittent problem which only occurs on
>hard right turns.
>
>Although I enter turn with proper gear selected & RPM up over 3500 car
>stumbles immediately when throttle is mashed & will not accelerate until I
>back off completely & feed throttle in gently. This only happens occasionally
>& never on left hand turns.
|