Chuck , that is the reason the new book has over 280 pics, just for you .
Never Be beaten by Equipment
Kas Kastner
----- Original Message -----
From: chasgee@aol.com
To: kaskas@cox.net ; sbracing@sbcglobal.net
Cc: fot@autox.team.net
Sent: Thursday, October 19, 2006 2:27 PM
Subject: Re: [FOT] Rear Brake Shoe "Arching" or Sizing?
So true about the pictures!
Chuck
-----Original Message-----
From: kaskas@cox.net
To: sbracing@sbcglobal.net
Cc: fot@autox.team.net
Sent: Thu, 19 Oct 2006 1:46 PM
Subject: Re: [FOT] Rear Brake Shoe "Arching" or Sizing?
Arc the shoes after you turn the drum. Then be very careful and do not allow
any grease or oil of any nature in the brake shoe and drum, this means even
finger prints. You'll see a definite improvement in braking and particular
if
you have an adjustable bias bar so you can put more brake to the rear. I went
into this for several pages in one of my books and again in this third book.
(mostly a lot of racers just look at the pictures and never read the text, I
guess).
Never Be beaten by Equipment
Kas Kastner
----- Original Message -----
From: Steven Benford Jr
To: FOT
Sent: Thursday, October 19, 2006 1:16 PM
Subject: [FOT] Rear Brake Shoe "Arching" or Sizing?
Amici,
The recent request for 240Z rear drums raises a question about "arching"
or sizing brake shoes to match the drum I.D.. Is anyone doing this? Does is
noticeably improve the braking?
I know there has been past environmental concerns about the asbestos dust
when sanding down the shoes. Does the modern day racing rated brake shoe
material contain asbestos?
Steve
=== Help keep Team.Net on the air
=== http://www.team.net/donate.html
-----------------------------------------------------------------------------
-
Check out the new AOL. Most comprehensive set of free safety and security
tools, free access to millions of high-quality videos from across the web,
free AOL Mail and more.
|