fot
[Top] [All Lists]

Re: [Fot] TR6 motor rebuild

To: "Charly Mitchel" <charly@mitchelplumbing.com>, "Friends"
Subject: Re: [Fot] TR6 motor rebuild
From: "U K MOTORSPORTS" <tr6racer21@earthlink.net>
Date: Fri, 14 Dec 2007 08:31:27 -0500
Charly

        Try these http//www.pauter.com/ , http//www.jepistons.com/ 
Chip  


> [Original Message]
> From: Charly Mitchel <charly@mitchelplumbing.com>
> To: Friends <fot@autox.team.net>; Chuck Arnold <triosan@gmail.com>
> Date: 12/14/2007 1:54:14 AM
> Subject: [Fot] TR6 motor rebuild
>
> FoT,
> I'm starting the rebuild on another TR6 racing motor and I'm looking for a
> little input as to which parts I should be using.  I'll be running a CR of
> about 11.5:1, have a KB cam and a stock crankshaft with Cambridge
flywheel.
> I'll be using the Lucas PI setup and will have a Tilton clutch.
> I know I'll need to go to some better pistons than stock and will
probably use
> Venolia pistons.
> Anybody got any suggestions on pistons and rods?  Is there a connecting
rod
> from another manufacturer that will take the place of a TR6 rod that is
> better?
> Thanks
> Charly Mitchel
> TR6 #44
> _______________________________________________
> http://www.team.net/donate.html
>
> Fot mailing list
> Fot@autox.team.net
> http://autox.team.net/mailman/listinfo/fot
>
>
> -- 
> No virus found in this incoming message.
> Version: 7.5.503 / Virus Database: 269.17.1/1183 - Release Date:
12/13/2007 9:15 AM
_______________________________________________
http://www.team.net/donate.html

Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot

<Prev in Thread] Current Thread [Next in Thread>