So the Roadster Factory no longer has them? They reproduced them for a while.
-----Original Message-----
From: fot-bounces@autox.team.net [mailto:fot-bounces@autox.team.net] On Behalf
Of fubog1@aol.com
Sent: Friday, September 12, 2008 7:18 AM
To: adcronin@ameritech.net; triumphs@autox.team.net
Cc: fot@autox.team.net
Subject: Re: [Fot] (no subject)
You can just drill & tap the block plugs & fit pipe plugs. The original
plugs came as a "tootsie roll" stick but they have been unavailable for
a long time.
HTH
Glen
-----Original Message-----
From: A Daniel Cronin <adcronin@ameritech.net>
To: Triumph List <triumphs@autox.team.net>
Cc: Friends of Triumph <fot@autox.team.net>
Sent: Thu, 11 Sep 2008 10:34 pm
Subject: [Fot] (no subject)
9/11
Listers:
Several days back (while on vacation) there were several submissions on
the 2 oil galley plugs in each end of the block and the one in the
head. I am undertaking a full rebuild and upgrading of my motor and
would like to know how you guys remove these plugs before I do
something I might regret! Any help would be appreciated!
Dan C_______________________________________________
http://www.team.net/donate.html
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
_______________________________________________
http://www.team.net/donate.html
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
_______________________________________________
http://www.team.net/donate.html
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|