I went and measured a spare engine block that I have - with my vernier. It
measures 13.38" from the flat bottom face of the block where the oil pan is
secured to the top of the block with the head removed.
Don Elliott, Original Owner, 1958 TR3A, Montreal
-----------------------------------------------
----- Original Message -----
From: "John Wagner" <j.wags63@yahoo.com>
To: <Fot@autox.team.net>
Sent: Tuesday, November 17, 2009 10:56 PM
Subject: [Fot] TR 2-3-4 block info
> Can someone tell me the stock block height of our favorite little tractor
> engine?
>
> Just the wrench
> John Wagner
> _______________________________________________
>
> Support Team.Net http://www.team.net/donate.html
>
> You are subscribed as 58tr3a@videotron.ca
>
> http://www.fot-racing.com
>
>
> Fot@autox.team.net
> http://autox.team.net/mailman/listinfo/fot
>
> Brought to you by Team.Net consulting - Unix software specialist.
>
>
> You are subscribed as 58tr3a@videotron.ca
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.fot-racing.com
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
Brought to you by Team.Net consulting - Unix software specialist.
|