fot
[Top] [All Lists]

Re: [Fot] TR3/4/5/6 Syncro Cups

To: "Larry Young" <cartravel@pobox.com>, <jeff_durant@comcast.net>
Subject: Re: [Fot] TR3/4/5/6 Syncro Cups
From: "Jerry Van Vlack" <jerryvv@roadrunner.com>
Date: Tue, 2 Feb 2010 18:52:18 -0500
Call Quantum Mechanics and get them from him. 
Good quality parts from a guy who knows good from bad.
NIL and all that stuff.

JVV
----- Original Message ----- 
From: "Larry Young" <cartravel@pobox.com>
To: <jeff_durant@comcast.net>
Cc: "FOT" <fot@autox.team.net>
Sent: Tuesday, February 02, 2010 11:15 AM
Subject: Re: [Fot] TR3/4/5/6 Syncro Cups


> Jeff,
> I don't see any other responses, so I'll give it a shot.
> 
> Sam Clark and I noted this problem in our transmission rebuild articles 
> at vtr.com.  This is a case where new is not always better. I measure 
> them first and reuse them if they are not worn out. If you have to 
> replace them, Victoria British seems to have the worst ones.  The ones 
> from the other dealers are usable, but worse than the originals. This is 
> based on experience from a few years back.  I have not tried the premium 
> ones.  They must be relatively new.  I have bought NOS sychro rings on 
> ebay.
> Larry
_______________________________________________

Support Team.Net http://www.team.net/donate.html

Suggested annual donation $12.96


http://www.fot-racing.com


Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot

Brought to you by Team.Net consulting - Unix software specialist.

<Prev in Thread] Current Thread [Next in Thread>