fot
[Top] [All Lists]

Re: [Fot] Shell Rotella

To: <fot@autox.team.net>
Subject: Re: [Fot] Shell Rotella
From: "MadMarx" <tr4racing@googlemail.com>
Date: Tue, 2 Nov 2010 13:20:18 +0100
I never bothered much with special oils.
I fill in my racing oil and treat the engine badly from the beginning on.

10W60 or 5W50 oil from the big brands and here we go.

Cheers
Chris

-----Urspr|ngliche Nachricht-----
Von: fot-bounces@autox.team.net [mailto:fot-bounces@autox.team.net] Im
Auftrag von Alexandre Camoletti
Gesendet: Dienstag, 2. November 2010 12:31
An: fot@autox.team.net
Betreff: [Fot] Shell Rotella

Gentlemen,

Following the informative exchange about running in oils, I still wonder
what Rotella (there are several variations) you use for initial run in ?

We European based folks will have to buy from the US as the Rotella family
of oils is available only in North America and Thailand.
In Europe Shell have the Rimula family for heavy duty (buses, lorries, etc),
but it will not be up to the job, see below:

I discussed this morning with an engineer of Shell in Switzerland. The
Rimula lorries oils are totally different from the Rotella family, as diesel
engine design in Europe and US is quite different and the oils are based on
the engines used locally. Shell even have specific oils for Switzerland
(tiny country with barely 7 million inhabitants) !
The engineer explained that the Shell oils here for passenger cars have low
formulations of Zinc and Phosphorus (well below 1000/million). He searched
his analysis database and came with a RIMULA "universal" oil (both for
trains, cars, lorries, etc, heavy and light duty use) in 10W40-or 15W40 with
content of 1200/million Zinc ad 1000/million Phosphorus. It is the RIMULA
R3-U+ 10W40 or 15W40.

As it seems a bit low in Zinc and Phosphorus (Greg Solow advised 1600 and
1300 respectively), I will buy Rotella in the US.

So what Rotella do you use for engine start  up?

Thank you !
Cheers
Alex

-----Message d'origine-----
De : Alexandre Camoletti [mailto:ac@camoletti.ch]
Envoyi : lundi 1 novembre 2010 09:47
@ : 'Greg Solow'
Objet : RE: [Fot] engine break-in

Thank you Greg! Inf act what type of Rotella should be used for initial
engine start up, just searched a little bit and found it is a family of oils
with many different ones?
And apparently Rotella is not available in Europe, only in North America and
Thailand according to shell.com Here for lorries Shell proposes various
grades/qualities of RIMULA. I will ask them the phosphorus and zinc content.
Thank you again !
Cheers
Alex

-----Message d'origine-----
De : Greg Solow [mailto:gregmogdoc@surfnetusa.com]
Envoyi : samedi 30 octobre 2010 08:39
@ : Alexandre Camoletti; Friends of Triumph Objet : Re: [Fot] engine
break-in

You may be able to contact Shell Oil technical services in Europe..They
could tell you the Zinc and Phosphorus content of the Shell Rotella oils
available in Europe. I would bet they are the same as  here.  The
"automotive Diesel" grade oils that are sold here, were formulated for
European Diesel engine cars to meet the car manufacturer's specs. You  are
looking for over 1600 parts per million of Zink and 1300 parts per million
of Phosphorus.


    Greg Solow
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/fot/tr4racing@googlemail.com
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums


<Prev in Thread] Current Thread [Next in Thread>