fot
[Top] [All Lists]

Re: [Fot] Tr3 Cylinder pressures

To: "'Alexandre Camoletti'" <ac@camoletti.ch>, <fot@autox.team.net>
Subject: Re: [Fot] Tr3 Cylinder pressures
From: "MadMarx" <tr4racing@googlemail.com>
Date: Tue, 2 Nov 2010 17:46:15 +0100
I'm not sure what you are looking for but with a similar cam and 10:1 I had
13,5 bar compression, with 11:1 it is 14,5.

Cheers
Chris

-----Urspr|ngliche Nachricht-----
Von: fot-bounces@autox.team.net [mailto:fot-bounces@autox.team.net] Im
Auftrag von Alexandre Camoletti
Gesendet: Dienstag, 2. November 2010 17:13
An: fot@autox.team.net
Betreff: Re: [Fot] Tr3 Cylinder pressures

But the cam specs and "intensity" certainly has an influence as well on
pressures.
Engine is not built yet and the info is needed by Jeff Schlemmer
(www.advanceddistributors.com) to recalibrate original distributor
accordingly. He can live without but the recurving would be better suited
with some idea of the cylinder pressures.
Cam is a Piper 3TR specs by TR Enterprises (a think it is a special grind
for them) with 3000; 40/80-80/40, lift .452-.450''but as Simon Watson told
me, cam is not so extreme it may look from the numbers, so it is relatively
tractable mid range, if  this info may help on the subject.

Or did Simon have the opportunity to measure cylinder pressures with this
cam installed and a CR of approx. 10:1 ?

-----Message d'origine-----
De : fot-bounces@autox.team.net [mailto:fot-bounces@autox.team.net] De la
part de Alexandre Camoletti
Envoyi : mardi 2 novembre 2010 16:53
@ : fot@autox.team.net
Objet : [Fot] Tr3 Cylinder pressures

Gentlemen,



How can I calculate the cylinder pressures in a TR3A head, with 87 mm Mahle
flat pistons and 10:1 compression ratio ?

Stroke is standard.

If it is possible at all, as it may depend on inlet flow capabilities I
suppose.

Engine will run extensively flowed SU 1 3/4 H6 as well as also much flown
inlet manifold (base is the stock item, but no increase in tube ID, just
radiusing everything corner) and larger (1.634'') and modern shape inlet
valves. If this info is of use for the question.

Thank you !
Cheers!

Alex
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/fot/ac@camoletti.ch
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/fot/tr4racing@googlemail.com
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums


<Prev in Thread] Current Thread [Next in Thread>