I've never had my track width measured. The car has only been
weighed once, and that was voluntary.
- Tony Drews
At 01:11 PM 1/31/2011, davehogye wrote:
>It's good to get some feedback regarding adjusting fender clearance.
>It has been brought to my attention that track may be measured by
>some racing groups.
>Has anyone had their cars' track scrutinized?
>Tire and wheel size is related to the matter of clearance as well. I
>believe that TR3s should be to running 5.5" wheels max., but that
>depends on the race organization.
>What tire, wheel, spacer combinations are being used for TR3s? If
>spacers are being used, then maybe the axle could be lengthen a bit.
>Could the Southwick conversion for TR3s be lengthened by 1/4"
>overall? Is it worth going to the trouble of having the option from Southwick?
>Moser cuts and machines the axles, it seams to me that an 1/8"
>adjustment could be easily made.
>Again, 1/8" would really help the weld grinding situation. There
>really isn't that much weld on there when compared the the tube
>thickness. Perhaps no one has had a problem after removing some
>weld, but I thought this question was worth asking. If added length
>creates other problems, then it's probably not a good idea.
>Thanks for the commentary,
>Dave H.
>_______________________________________________
>fot@autox.team.net
>
>http://www.fot-racing.com
>
>Donate: http://www.team.net/donate.html
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>Unsubscribe: http://autox.team.net/mailman/options/fot/tony@tonydrews.com
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|