fot
[Top] [All Lists]

Re: [Fot] Early TR6 Trans into a 64 TR4

To: Tony Drews <tony@tonydrews.com> a=zNIbJC8RGzgA:10 a=4XwCEAaBuO8A:10 a=kj9zAlcOel0A:10 a=xsHkoB8PPi2/eLDqxzg3jQ==:17 a=dKaUxyAQAAAA:8 a=zOoktvdPAAAA:8 a=JcvzPq48AAAA:8 a=ayC55rCoAAAA:8 a=mkkZP590AAAA:8 a=Ze96msxwglxYkKg2h7kA:9 a=CjuIK1q_8ugA:10 a=J0aUVQLP0FIA:10 a=m3MdUl94G8cA:10 a=E3LtK94QmHYA:10 a=LuNFSA0Xe1kA:10 a=OrG29BY1RXbIOASU:21 a=IsMY5qg87opYhLLo:21 a=xsHkoB8PPi2/eLDqxzg3jQ==:117
Subject: Re: [Fot] Early TR6 Trans into a 64 TR4
From: John Hasty <jhhasty@gdhs.com>
Date: Fri, 10 May 2013 22:19:39 -0400
Cc: Friends of triumph <fot@autox.team.net>
Delivered-to: mharc@autox.team.net
Delivered-to: fot@autox.team.net
References: <518D28EB.5060902@charter.net> <71.C6.12729.5D29D815@hrndva-omtalb.mail.rr.com> <20130511011529.C137F425A4@autox.team.net>
Tony , Henry  .....I am going to Watkins Glen 6/7; so won't make
Summit.....hope to see you guys at Mid Ohio for another "blanket" race!
Sent from my iPhone

On May 10, 2013, at 9:12 PM, Tony Drews <tony@tonydrews.com> wrote:

> May need to slot the rear mounts a bit to get things to line up too,
although I didn't need to.
>
> Tony Drews
>
> At 07:37 PM 5/10/2013, Steve Yott wrote:
>> Glenn,
>> This is a very common swap and will actually be a better setup as the case
>> of the TR6 gearbox is stronger than a TR4 box.  You most likely will need
>> longer studs at the top of the engine because the gearbox flange is
thicker.
>> The TR6 output flange you mention is actually a better option as it is
>> stronger than the TR4 flange and mates up to the driveshaft the same as
the
>> earlier flange.
>>
>> Steve Yott
>>
>> -----Original Message-----
>> From: fot-bounces@autox.team.net [mailto:fot-bounces@autox.team.net] On
>> Behalf Of Glenn Franco
>> Sent: Friday, May 10, 2013 12:06 PM
>> To: Friends of triumph; 6pack@autox.team.net
>> Subject: [Fot] Early TR6 Trans into a 64 TR4
>>
>> Group
>> Will a 1970 TR6 4 speed trans swap into a 1964 TR4.
>> I'm in the process of adapting an A-type O/D to a Trans and have lots of
>> spare 4 speeds around and thought it would be easier to mate up the 2
(trans
>> and O/D) for a quick swap later.
>> The only big difference I have seen is the rear companion flange is
>> different than a TR6 but the O/D has a TR4 Flange.
>> Thanks in advance
>> Glenn
>> _______________________________________________
>> fot@autox.team.net
>>
>> http://www.fot-racing.com
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/tr4@wi.rr.com
>> _______________________________________________
>> fot@autox.team.net
>>
>> http://www.fot-racing.com
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/tony@tonydrews.com
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/jhhasty@gdhs.com
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Archive: http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>