+1
Marty
> From: jhasty@mhc-law.com
> To: fot@autox.team.net
> Date: Tue, 2 Dec 2014 02:49:59 +0000
> CC: baucom86@gmail.com
> Subject: [Fot] Fwd: TR6 - Cometic MLS Head Gasket
>
> Cometic head gaskets.....anyone interested?
>
> Sent from my iPhone
>
> Begin forwarded message:
>
> Date: December 1, 2014 at 9:32:58 PM EST
> Subject: Re: [Fot] TR6 - Cometic MLS Head Gasket
>
> It requires a special die to make a MLS version which they will do but they
> want a 2500-3000 dollar minimum order the first time. There is more to it
than
> just having the pattern, the MLS gasket has to have raised rings on all the
> sealing areas of the outer two layers which is where the stamping die comes
in
> which has to be CNC machined. That is why they want the minimum order the
> first time to cover there cost for the die then after that they will cost
the
> same as any other gasket. They don't charge for the die just require
selling
> enough gaskets up front to cover the initial cost. I think it works out to
> about $100 a gasket. So if we order 28-30 it's covered.
>
> On Monday, December 1, 2014, John Hasty
> FYI
>
> Sent from my iPhone
>
> Begin forwarded message:
>
> From: Peter Vucinic
>
> cript:;>>>
> Date: December 1, 2014 at 4:30:17 PM EST
> To: 'marty'
>
,
> 'FOT'
> Subject: Re: [Fot] TR6 - Cometic MLS Head Gasket
>
> Marty,
> I've asked them if the will cut an MLS version. The already have the head
> gasket pattern. SO I don't see an issue? But you never know.
>
> Cheers..
>
>
> -----Original Message-----
> From: Fot [mailto:fot-bounces@autox.team.net<javascript:;>] On Behalf Of
> marty
> Sent: Tuesday, 2 December 2014 1:31 AM
> To: FOT
> Subject: Re: [Fot] TR6 - Cometic MLS Head Gasket
>
> From what I can tell on line it looks as though Cometic only offers copper
> head gaskets for the TR6. Darn.
>
>
>
> Marty
>
>
> From:
>
> ript:;>>
> To:
> Date: Mon, 1 Dec 2014 13:09:40 +1100
> Subject: [Fot] TR6 - Cometic MLS Head Gasket
>
> Wondering if anyone on the list has used/purchased a Cometic Multi
> Layer Steel head gasket from Cometic?
>
> Or are there other suppliers for Steel head gaskets for the TR6?
>
> Thank you in advance
>
>
>
>
>
>
>
> "You can Make a Small Fortune From Motor Racing. As long as You
> Started
> With
> A Lage Fortune!"
>
> Kind Regards
>
> Peter Vucinic
>
> TR4 - TR7 V8 - Spitfir MkII
>
> _______________________________________________
>
>
>
>
> <http://www.fot-racing.com/> http://www.fot-racing.com
>
>
>
> Donate: <http://www.team.net/donate.html>
> http://www.team.net/donate.html
>
> Archive: <http://www.team.net/archive> http://www.team.net/archive
>
> Forums: <http://www.team.net/forums> http://www.team.net/forums
> _______________________________________________
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/trmarty@hotmail.com
> _______________________________________________
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/pvucinic@netspace.net.au
> _______________________________________________
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/jhasty@mhc-law.com
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/trmarty@hotmail.com
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
|