fot
[Top] [All Lists]

Re: [Fot] Cylinder Head

To: <gasket.works@gte.net>, "'Mike Munson'" <fasttrs@yahoo.com>, "'Allen Washatko'" <awashatko@wi.rr.com>
Subject: Re: [Fot] Cylinder Head
From: "Joe Curry" <spitlist@cox.net>
Date: Tue, 2 Dec 2014 11:19:58 -0700
Authentication-results: cox.net; none
Cc: 'FOT' <fot@autox.team.net>
Delivered-to: mharc@autox.team.net
Delivered-to: fot@autox.team.net
References: <EFF1CFF6-8529-4E06-8E2A-03E690F8262C@wi.rr.com> <9B4FAD39-1BE8-47C9-9E9A-0B3E14059248@yahoo.com> <NhlB1p0160NyJgq01hlCnV>
Thread-index: AdAOV7oL7vbnxL+1SCuVnhSZN+8PRAABHFWQ
That is exactly my own thought.  It all depends on the gasket.  My first
hint of this was when I opened a NOS head gasket for a Spitfire engine and a
little slip of paper fell out.  It stated that after initial installation
and first running up to operating temperature, the head needs to be
re-torqued while still hot.  I have followed this ever since and have never
had a head gasket failure.

Joe C.

-----Original Message-----
From: Fot [mailto:fot-bounces@autox.team.net] On Behalf Of
gasket.works@gte.net
Sent: Tuesday, December 02, 2014 10:45 AM
To: Mike Munson; Allen Washatko
Cc: FOT
Subject: Re: [Fot] Cylinder Head

Re-torquing would be needed if the gasket you are using has "creep".  I.E.
Might be "Spongy" due to gasses within the fibers.  So, as motor heats up
the internal pockets of gas will expand and might escape. This De-gassing
effect will loose a small amount of its original volume.  So, when cool the
gasket would have  shrunk somewhat. Hence, the axial clamping load has
changed and original "torque" is effected.  

 A solid gasket without these pockets would not suffer this way. 


 
Sent via BlackBerry from T-Mobile

-----Original Message-----
From: Mike Munson <fasttrs@yahoo.com>
Date: Tue, 02 Dec 2014 10:11:40 
To: Allen Washatko<awashatko@wi.rr.com>
Cc: Friends of Triumph<fot@autox.team.net>
Subject: Re: [Fot] Cylinder Head

I do, and will get a little movement out of 3 to 5 each time.

Mike Munson
#28 EP TR6


> On Dec 1, 2014, at 9:08 PM, Allen Washatko <awashatko@wi.rr.com> wrote:
>
> FoT,
>
> I was asked if I re-torque the cylinder head on my TR6 after an
> initial break-in period. Never have. ARP doesn't recommend it.
>
> Thoughts?
>
> Thanks,
>
> Allen
>
> Allen & Jody Washatko
> 1971 TR6  - Number 6
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/fasttrs@yahoo.com
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Archive: http://www.team.net/archive
http://autox.team.net/mailman/options/fot/gasket.works@gte.net
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Archive: http://www.team.net/archive
http://autox.team.net/mailman/options/fot/spitlist@cox.net
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Archive: http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>