fot
[Top] [All Lists]

Re: [Fot] TR6 crank journal dimensions

To: "'marty'" <trmarty@hotmail.com>, "'FOT'" <fot@autox.team.net>
Subject: Re: [Fot] TR6 crank journal dimensions
From: "Steve Yott" <tr4@wi.rr.com>
Date: Mon, 15 Dec 2014 10:18:28 -0600
Delivered-to: mharc@autox.team.net
Delivered-to: fot@autox.team.net
References: <BLU168-W56F859F5948ECEA5492F25BA6F0@phx.gbl>
Thread-index: AdAYgCgEdf6KPBjxR+CMHivcagDUKAAAXtyg
Mains 2.3110 to 2.3315 (way too much tolerance here)  Shoot for the middle
2.3215
Rods 1.8750 to 1.8755 

I like to keep a street engine tight and a race engine loose....

Steve Yott

-----Original Message-----
From: Fot [mailto:fot-bounces@autox.team.net] On Behalf Of marty
Sent: Monday, December 15, 2014 9:56 AM
To: FOT
Subject: [Fot] TR6 crank journal dimensions

Anybody have the dimensions handy for the TR6 crankshaft main and rod
journals? I don't seem have them at work. I found some on the internet but
think they left off a number.



Thanks,



Marty
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Archive: http://www.team.net/archive
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Archive: http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>