Nothing wrong with the stock ones. Just have them reground.
Chuck
> On Dec 31, 2014, at 5:03 PM, robert bownes <bownes@web9.com> wrote:
>
> Has anyone ever found a decent replacement lifter for the 6 cylinder
> engines?
>
>
>
>> On Wed, Dec 31, 2014 at 7:08 PM, <gasket.works@gte.net> wrote:
>>
>> Several years ago I got fed up with available lifters. So, I had them
>> made with the help of other FoT members. I asked one of our brilliant
>> metallurgists what metal to use. We decided on A2 tool steel. Easy to
>> design on CAD. Made several sets. Have used one set through many
seasons.
>> Different motors, cams and still look near new. They rockwell tested near
>> 62 - 63 if I recall. Almost Mirror face finnish. Flat face.
>>
>> Same thing with intake / exhaust gaskets (probably had 2000 made).
>>
>> M
>>
>>
>>
>> Sent via BlackBerry from T-Mobile
>> _______________________________________________
>> fot@autox.team.net
>>
>> http://www.fot-racing.com
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/fot/bownes@web9.com
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/chasgee@aol.com
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
|