Cambridge Motorsport has rear shoes with Carbotech XP8 material. They have also
rear shoes with Kellate Metallic linings(chelated metallic fibers). I've used
both : both are very heat resistant and the Carboteck has the highest friction.
You can set the brake bias to the rear as much as needed (i.e. 5/3 pressure
ratio to the rear on a dry track)without overheating (lightweight brakedrums
with ventilation drillings). They are expensive though : 250 - 300 ? + VAT /
set. Cambridge Motorsport are also selling rear shoes with Mintex20 linings,
108 ? + VAT.
The wear rate of the Carboteck linings seems to depend much on the temperature.
Marcel
Van: "fot" <fot at autox.team.net>
Aan: "fot" <fot at autox.team.net>
Cc: "ryan murphy" <ryan.murphy at fdlco.wi.gov>
Verzonden: Woensdag 18 oktober 2017 18:31:35
Onderwerp: [Fot] Supplier for Brake shoes for TR4
The left rear brake shoe lining came off the shoe at Blackhawk Farms last
weekend. I am looking for suppliers for brake shoes with riveted linings as the
one that came off was a ?glued? lining. I?d also like to specify the lining to
use, the Carbotech linings whose pads we use and like on the front discs. I?m
also open to any suggestions about what to use for the rear brake shoes. The
above would just be my preference based on the latest experience. I see
Revington has competition shoes with ?Mintex 20? linings I think for about $120
a set which appear to be rivited. Anyone with experience with these brake shoes
and linings?
Thanks in advance for any info you can provide.
Tim & Ryan Murphy
1961 TR4 #317 BRG
_______________________________________________
fot at autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/fot/attachments/20171018/6f894afb/attachment.html>
|